Running Osx On Mac Power Pc's

Hello

I have looked at the mac site about compatibility and i know it doesnt show the power pc, but i need to know if its possible to run osx on:

Powermac 6500

Powermac 6200

Powermac 6400

Powermac 7200

Powermac 5400

All of these being power pc's

Even if i have to get an upgrade in some areas (ie ram, hd, motherboard and cpu) i need to know if it will work

Thnaks

Pops

#100398

You can only run it on G3 CPU's and above, the oldest PPC you can run it on is the first iMac

#100412

6500= 225,250,275 or 300mhz You could run osx but would be horrid. It only supports 128mb ram.

6200= 60mhz Not till hell freezes over.

6400= 200mhz Would not try it.

7200= 75,90,120mhz No.

5400= 120,180,200mhz still no.

If you do try it on any of these machines remember none of them are ment to have osx on them. You'll have to get some special software to install them with osx which you can find at www.macupdate.com .

#100415

Not true,

Mac OS x10.1 can run on a 603e, 604, or 604e pocesor with the use of the utility XPostFacto.

But your problem is that the 5xxx and 6xxx sseries of machines had what they call a broken ROM. That means it will not boot OS X on its own no matter how many times you tell it to do so. You have to type a command at the open firmware promt to get it to boot. It is a royal pain from what I have heard. If you have the means I strongly recomend you try and find a 7300, 7600, 7500, 8500, 9500, Power Tower, Power Tower Pro, Umax, or Daystar machine if you want to run OS X on an older Power Mac. You can often find then for sale at college auctions and were major offices sell off there old equipment. I have both a PowerTower Pro paid $80 and a Power Mac 9500 paid $19.95 and have run Ma OS X 10.1 on then without any problem with the stock 604e CPUs. Now they were far from fast, as a matter of fact they were rather slugish. Now I have a 350Mhz G3 upgrade card in my 9500 and 786MB of RAM and Mac OS X 10.2.6 and it runs pretty good. It is not going to win any speed tests against a newer Power Mac but I can browse the internet, use MS Office X, Adobe Photoshop, iTunes, Safari, iPhoto and several other programs without any problem. The bigest disadvantage at this time is the graphics card I have. It can give me millions of colors but it had no OpenGL support and it is fairly slow by todays standards. So it can be done with the right machine. Unfortunatly you do not have the right machine for the job. But if you still wnat to try and get OS X to run on it make sure you only use OS X 10.1 and you have plenty of RAM and get XPostFacto from here as it is free. http://eshop.macsales.com/OSXCenter/XPostFacto/

Have fun and good luck. ;)

#100479

Originally posted by XP_2003@Jan 15 2004, 12:23 PM

You can only run it on G3 CPU's and above, the oldest PPC you can run it on is the first iMac

Actually thats totally incorrect...

The earliest Mac you can run OSX on without a lot of upgrading (only need more ram) is a Biege G3 233(1997)... predates the imac(1998) by almost a year.

BUT actually you can run OSX on 8600 and 9600 powermacs with the proper upgrades, ie: G3 upgrade daughter board, ram, etc. but it really isn't worth the cost to get it up to the speed really needed to make use of the OS.

I just found this...

http://eshop.macsales.com/OSXCenter/XPostFacto/

"While Apple has limited its support for Mac OS X to those machines that originally came with a G3 or G4 processor, it is possible to install Mac OS X on some earlier machines. The unsupported machines that work now are the 7300, 7500, 7600, 8500, 8600, 9500 and 9600, as well the clones that were based on one of these systems (the Umax S900 and J700, and many of the Power Computing models). Other models that use the PCI architecture may be made to work in time. Version 2.2 of XPostFacto adds limited support for the original Powerbook G3, the 3400, and the 2400."

FYI: I happen to have a Biege G3 w/ a G4 450 upgrade, Radeon 7000 (hacked to make use of Quartz), Firewire/USB PCI card, ATA 66 IDE controller, 256mb ram, and a 20GB HD.

which cost me less that $300 to put together...

And OSX runs great on it.

#100481

Originally posted by MageGuru@Jan 16 2004, 12:07 AM

The earliest Mac you can run OSX on without a lot of upgrading (only need more ram) is a Biege G3 233(1997)... predates the imac(1998) by almost a year.

I just read it somewhere :shy:

#100569

Hey heres and idea. I heard that some people hooked up 100 PS2's and made a supercomputer. Could that be done with any specific type of powermac. and believe me i have way over 100 of them lying around so the only hard part would be hooking them all together

#100921

Originally posted by popsandthefamily@Jan 16 2004, 08:35 PM

i have way over 100 of them lying around

:blink: what? :huh:

#100937