Got Shell Shocked

Winlogon.exe - Bad Image

The application or dll "C:/Windows/System32/Shell32.dll" is not a valid Windows image. Please check this against your installation diskette.

User Interface Failure

The Logon User Interface dll "Msgina.dll" failed to load. Contact your system Administrator to replace the dll, or restore the original dll.

Description: I was doing some normal Reshacking to my shell32 like I normally do, nothing different, so I used Replacer to change my system file more quickly, then when it tells me to restart I do. So now my computers booting as normal then after the WindowsXP Home Edition screen with the status bar I get the 2 messages as above one after the other. Ive never had either of these problems when replacing my shell32 so that it happens now freaked me out. Anyones help is really appreciated, I don feel like losing all of my files Ive aquired through about a years worth of saving. By the way, I tried all the different start up options possible that XP gives me but none of them can fix my problem. I know most likely my best chance would be to restore my shell32 from a command prompt but I cant get to it right now without making a boot disk (making one now). After I can access DOS properly at home Ill try anything you guys/girls can throw at me. *I do have a shell32 backup in the system32 folder*. Thanks alot. (:

#90682

do you have the xp installation cd? you can use the recovery console and just delete the files and rename the backups. i'm sure you know the commands, but here's an example:

once in recovery console, get to system32.

cd system32

del shell32.dll

ren shell32.backup shell32.dll

exit

you can do the same thing for msgina.dll.

if that doesn't work, you can also copy the files over from the cd.

that's probably your best option. you could also do a repair installation.

you could also set the drive up as a secondary drive and try to access it that way.

#90691

Did you try a system restore? Hold down F8 when booting.

That should solve your problem. If it didn't, you can try the recovery console, but that rarely works.

If you have any important data, before you reinstall, download and burn KNOPPIX (hope you have a friend w/ a burner), its a live linux CD. Its very easy to use. Look for a program called "K3B". Its a GUI CD Burner. Its a lot like EZCDCREATOR. Just drag all your data, and burn.

Then reinstall, and your stuff is saved.

#90712

This happened to me as well. When I replaced my modded shell32.dll after I installed IconPackager (or Microangelo), the next time I reboot this showed up. Crap.

I ended up re-install XP, and this time no IconPackager or Microangelo is installed, then I used batchmod which is included in Flyakite's Panther pack 3.6 to replace my system files, and that messege never show up again.

I still not quite sure what t'was all about.... >.<

-cherrysoul

#90808

thanks for some help guys. hey contra, im at a knoppix ftp but theres quite a few files, which ones do i need specifically to run it, i don need anything extra.

11/20/2003 02:22AM 28,448 KNOPPIX-CHANGELOG.txt

05/16/2003 12:00AM 10,162 KNOPPIX-FAQ-EN.txt

05/16/2003 12:00AM 10,616 KNOPPIX-FAQ-ES.txt

05/16/2003 12:00AM 12,097 KNOPPIX-FAQ-FR.txt

05/16/2003 12:00AM 11,894 KNOPPIX-FAQ-IT.txt

05/16/2003 12:00AM 9,767 KNOPPIX-FAQ-NL.txt

07/12/2003 09:19AM 11,786 KNOPPIX-FAQ-PL.txt

05/16/2003 12:00AM 11,378 KNOPPIX-FAQ.txt

11/13/2003 08:17PM 732,551,168 KNOPPIX_V3.3-2003-11-14-DE.iso

11/13/2003 09:18PM 65 KNOPPIX_V3.3-2003-11-14-DE.iso.md5

11/13/2003 09:29PM 408 KNOPPIX_V3.3-2003-11-14-DE.iso.md5.asc

11/13/2003 08:20PM 732,551,168 KNOPPIX_V3.3-2003-11-14-EN.iso

11/13/2003 09:18PM 65 KNOPPIX_V3.3-2003-11-14-EN.iso.md5

11/13/2003 09:29PM 408 KNOPPIX_V3.3-2003-11-14-EN.iso.md5.asc

11/20/2003 12:28AM 733,929,472 KNOPPIX_V3.3-2003-11-19-DE.iso

11/20/2003 02:14AM 65 KNOPPIX_V3.3-2003-11-19-DE.iso.md5

11/20/2003 02:22AM 408 KNOPPIX_V3.3-2003-11-19-DE.iso.md5.asc

11/20/2003 12:30AM 733,929,472 KNOPPIX_V3.3-2003-11-19-EN.iso

11/20/2003 02:15AM 65 KNOPPIX_V3.3-2003-11-19-EN.iso.md5

11/20/2003 02:22AM 408 KNOPPIX_V3.3-2003-11-19-EN.iso.md5.asc

09/23/2003 09:28PM 887 README

10/08/2003 09:19PM Directory contrib

03/08/2003 12:00AM Directory docs

09/21/2003 11:25PM 7,790 knoppix-cheatcodes.txt

11/11/2001 12:00AM Directory knoppix-cover

04/28/2003 12:00AM Directory knoppix-customize

05/14/2001 12:00AM Directory knoppix-vortrag-als2000

11/20/2003 02:13AM Directory md5-old

06/21/2003 12:00AM 202,578 packages-dvd.txt

11/20/2003 03:20AM 109,519 packages.txt

theres the list, now which ones do i need to burn to a disc sir geek?

#91269

You need "11/20/2003 12:30AM 733,929,472 KNOPPIX_V3.3-2003-11-19-EN.iso"

In other words, the Knoppix v3.3 ISO which was created on the 19th of November.

It may also be worthwhile getting the md5 file to check that the ISO you get is downloaded right <_<

#91271

Yeah, Steve is right. Check the MD5 sums, and if you use PGP/GPG, use the .asc to check the signature.

#91274

I had exactly the same problem.

If you have your XP installation disc with you, boot into it and the should be an option for the admin to do recovery work. Choose that option and you'll be in DOS. Like dreamz said, delete the modded one and restore the backup copy. Reboot and you should be able to get into XP.

You don't need to restore msgina.dll. At least I didn't.

#91369