Dell 2007FP Problem

I've got a problem with my recently bought (read bought for Christmas) Dell 2007FP.

It worked fine so far and I liked it very much until I discovered today a problem that I know was not there yesterday. Now it displays a yellow area, a small rectangle just where the Windows Flag or Apples hmm.. apple is. It goes on just to where the application name begins in OS X.

The interesting particularity about it is the fact it depends on the VIEWING ANGLE. For example, if I stand up and look down on the monitor, it doesn't show at all!

But if I sit down, bang, there it is.

If I look at it from the bottom to the top, the rectangle increases in height, becomes a lot bigger but of course loses some color, becomes faded a bit.

I'm quite puzzled as to what generated this behaviour, maybe you could help.

#442936

Have you tried fooling with those options and controls on the front of the monitor? I can't really think of what happened, but some solution may lie in those.

#442943

Yup, already did that. Did almost everything except resetting it to factory settings...don't think it will help though since the controls affect how the image displays...and it displays ok when you look at it from a higher point of view.

What I also did, and without success: powered it up and down, changed input from vga to dvi, used it with another computer.

It really bothers me, please, any suggestions would be highly appreciated. :)

#442964

I got a 2407WFP in November that had a similar problem. One way for sure to tell is [when you're sitting down, obviously] to adjust the brightness and contrast. If the visuals change but that area doesn't, then it's probably, like mine had, a lighting problem (although noting that my glitch wasn't really in the same region) =/. Or so the dell support guy said. I had to send it back in and do a bunch of crap to get another.

Also, when did it happen? Did it randomly occur while you were working or did it just happen when you started up the next day? Is it visible on the boot screen?

#442967

I tried adjusting the contrast&brightness and I'm happy to report that the area changes with the rest of the picture. Meaning it does not show when the contrast is set to 0 (the display is completely black) and when it's set to 100, it is somewhat brighter.

I can't pinpoint the exact moment when it happened, I noticed it when I booted up, I didn't notice it before, maybe it was there, but I doubt it.

The color is yellow on a white background, if the monitor displays other colors in that spot it alters the colors shown, meaning that blue is made green and so on. Black remains black so it's invisible on a black image.

It can't be burn-in since I didn't have any yellow picture display there and I take very good care of the monitor, have the screensaver set to 5 min of inactivity and turnoff point to 10 min.

It displays everywhere, even in bios, and it's only visible in certain viewing angles. It does not show when looking at it from a very high viewing point.

#443052

Since it's still under warranty/service? I'd try Dell's online troubleshooter if that doesn't work then contact tech support.

My experience has always been exceptional when dealing with their tech support and it almost makes up for the system issues.

#443427

Here is a picture with the problem. I'm still no closer to discovering what it is, what caused it and what can be done.

It puzzels me a lot. I haven't heard anyone having this sort of problem so I'm in a tough spot.

Had no luck with Dell, it seems they are less eager to service a device sold in what they consider to be a third-world country that in US or UK, even if I paid more for their product that an US citizen for example.

And I'm not willing to part with the device and hope for the best, that's a no-no, I need it too much.

As you can see, it's quite a brilliant yellow, has a rather defined area, appeared out of the blue.

Also my first impression that it shows only in certain angles is wrong. It shows up in all angles, more or less.

Please help.

Signed,

A Desperate Man

post-33526-1173729649_thumb.jpg

12032007059.jpg
12032007059.jpg

#446318

Whoa, looks like a bad connection to me, have you tried using a different cable?

#446393

Send it back... it's a manufacturing defect.

Almost looks like glue residue from a piece of tape stained the inside of the panel.

#446407

Actually you know what I think your right :o

#446409

take a screenshot and see if it appears there. if not, then its def a burn. if it shows in your screenshot, then you got some funky software running

#446411

Thanks guys for your responses.

It's definitely a display problem.

It does not appear in a screenshot and I already tried both the DVI and the D-SUB cables without any improvement.

If your suspicions are correct, is there anything I can do to correct it? If I try to open it and rub the glue away, will it work? Can I even do that? It worked ok for at least a month but maybe the heat hardened the glue?

I know that will ruin the warranty but I just don't want to send it and then wait a lot to get it back, because I need it at my work and I don't have another one.

#446490

if it is adhesive (which i do believe it is, that ugly bright yellow electric component stuff) you should be able to crack it open and take it off with... something. Goo Gone will work.

And the angle thing probably just has to do with the glass bending light, all monitors are magnified a bit.

#446492

I'd be careful, cracking it open=voiding the warrenty.

You should send it back to them, im sure once they SEE it they will either fix it or send you a new moniter.

#446497

Send it back... if it's still under warranty, it definitely qualifies for the 24 or more pixel defect clause.

#446504

Sorry for the bump, but the problem is still not solved.

I can't seem to convince myself to send it back, I've had numerous phone calls with the company who sold it, and it seems it will take them about 2 weeks to repair it.

In my experience the term they give you is never respected, so I expect 1 month or so to be the case, especially since I have to send it (or better, deliver it myself in order to get a receipt) to my capital city-300 km away, then they send it to their service center 1000 KM AWAY! Then waiting for Dell to ship parts, then all the way back. Phuah.

So I ask you again, is there ANY chnace I might repair it myself?

Please note that this is a LCD monitor.

Can I just open the LCD panel and wipe it off? Would it not upset the crystals there. I know there's a liquid there.

Thanks guys.

#452145

Try getting new drivers for your monitor that might help... the default windows drivers sometimes makes the display a little wierd. If that doesn't work you should replace your monitor..

Sorry for bumping too :( I thought this might help someone with the same problem he had :P

#452288

So I ask you again, is there ANY chnace I might repair it myself?

No. You cannot fix it yourself. Its probably not going to be fixed anyway. They will just put it on the recylcing train and send you a new one.

The reason: As you might like to check on some website such a display is made of a couple of very sensitive layers. Not only is there a chance that you destruct such a layer, but there is also a chance it isn't even on the very first one, but on a layer below..

just send it back.

#452516

I FOUND THE ANSWER!

IT"S TAPE!!

Check it out here: DELL Support Forum

Many guys have the same problem. They opened it and confirmed it's tape left there.

I think I can send it back but I fear dead pixels, bad image quality for the replacement etc.

The replacements are always refurbished ones it seems.

Not to mention the replacement might have the same problem.

So what do you think, should i open it and remove it? Some guys did it.

On the other hand I heard some advices as to not open it cause I might get some air between the layers and that would be bad etc.

What do you think?

#460958

Those monitors open very easily.

Air between the layers????? your joking right! Anyone who said not to because of "air between the layers" doesnt have a CLUE!!!!

I've used 17 and 19" LCD's in DIY projectors and never had a problem. And for that you ditch everything! Just a raw LCD panel with all of the controls and PCB's pulled out of the way.

You have nothing to worry about so long as you handle with care and take your time.

Air between the layers.... thats a good one! Some people are clearly taking LCD technology, mixing it with plasma technology and making up their own new hybrid.

#461075