i just recently tried another hard disk in my pc and i found that the hard disk didnt work, so i put in the hard disk that i was previously using, only to find that when i turn on my pc i get a black screen. what should i do?
Black screen after replacing Hard Drive
what do u mean by this? when boot up your computer? when you try to sign in? when you already are signed in? it could be a problem with boot.ini...i think or possibly an explorer problem. also, the post doesn't belong here, so make sure next you do post it's in the right place.
i wish you luck ![]()
ok, so anyway. when i press the power button on my computer i only get a black screen, i only tried another hard disk to see if it was any good, but it didn't work so i put my regular old hard disk in, THATS ALL I DID, WTF?
ok..try this. press F8 when your comp boots up. it should take you to a text yadda yadda yadda, select last well known configuration or something like that. just to make it clear, you press the power button and ur computer screen remains black? you might have put the hard drive in improperly? have you tried waiting a while (10 min or so) before turning it off and on again?
all i get when i turn on is a black screen. no text. i cant do anything. it appears that avarything is connected properly
hmmm...thats as far as i know. maybe you should wait until someone else comes to help. anyways peace out i wish you luck.
Hey man, double check your monitor. If your fan is running yet you have no display, chances are the connection is bad. Try a different monitor.
If all fails, try checking if your video card is properly seated in its slot. It's possible you might've accidentally knocked it out of whack. Give it an extra push.
I shall try looking at the video card. i did start to remove it but then changed my mind.
also, the post doesn't belong here, so make sure next you do post it's in the right place.
Thanks for your assistance, but we've been moderating for quite a while now and I think we're capable of handling this ourselves
.
@mroelandts--he's right. This didn't belong in General Discussion. Anyway, if the BIOS aren't even showing up, it's probably a problem with your video card or display connection.
Hope this helps, and welcome to the forums both of you!
//Thread Moved
-NC
lol srry NC, just trying to help ![]()
are you using the drive as the master drive with your operating system on it or a secondary/slave drive for data storage? make sure you don't have them both setup to be the master or there could be a conflict. if its brand new and you just replaced your old one you need to reformat it with your windows discs. hope that makes sense.
Sounds like a display issue. Could be the BIOS got confused when you replaced the drive, and the display isn't working right as result. Meanwhile, the drive is probably fine, as is Windows.
Check your display card and its connections. If it still won't work, try replacing the video card with a different one and see if that works.
Once you get ti working, check your BIOS and see if anything got confused.
Good luck.
Oh, and one more thing.
If you turn it on, get no display, then have it wailing crazy noises, it's probably FUBAR.Time for a new comp, or if you love your current too much, a new mobo and/or processor.
Aqua-Soft Forums