Deleting a Windows XP Installation

I've got XP in two drives. How can I delete one installation? It won't let me format (It's in spanish but it says something like "format couldn't be completed", and if i boot from cd it tells me that I can't format just because there are temporary files on the drive) Any ideas??

#337899

have you tried using an external program like partion magic?

#337901

Have you tried this:

Make sure the drive you want to wipe out has no paging file from the other drive's OS;

disable all the hard drives, pull their plug, except the one you want to delete the partition.

Boot with your cd and delete the partition, format if you want...

Plug back your drives and boot

then go take a look at your "Computer Management" console under the "Drive Management" menu and partition the drive, then format if it's not done already.

hope it helped...

#337928

you might have to boot into safe mode to delete the page file, but once done you can boot into normal mode and run compmgmt.msc from start/run and format the drive there

no need to unplug or open your case at all!

#337933

if you cant format a drive somethings realy fubard unless your tryint to format the drive windows is running off. If you boot from a CD you should be able to format anything regardless :(

To delete a windows install off of a drive all you gotta do is delete the folders and files physicaly off the drive then edit the boot.ini. Carefull that you dont delete any boot files through

#337934

I would do something like what Day recommended. You don't have to worry about deleting swap files, etc. you can just disable them by going into Start -> Control Panel -> System, then click "Advanced" tab, press "Settings" button under "Performance", choose "Advanced tab" and click the "Change" button to disable virtual memory. Furthermore, have you checked whether the programs you have running are trying to access the other hard drive or not?

#337962

the best advice i can give you is to ask somebody more experienced to do it for you.

several things might go wrong if you just delete the partition and format it again. for instance, the drive you are trying to format might be the one used to boot into windows, in which case formatting would prevent both your windows installs from starting up.

#338389

You can put a program like this:

http://dban.sourceforge.net/

on a floppy, and boot into it. It will completely wipe your harddrive. It worked perfectly for me.

#338914

Sorry for not answering before, but I was busy with another things.

I'm going to tell the whole story for you to understand everything better:

I made two partitions on a 40 Gb HD; 1st with 5Gb, 2nd with more or less 35 Gb. I installed Win Xp on the small one, but afrter a 6 month test I realized that it was not a good idea (the computer ran quickly out of resources)

I needed to join the two partitions, so I inserted the Win XP CD to re install, but it copies the temporary files to the same drive where windows is installed, so it wouldn't let me format-That was what I was asking, because I had to Install it on the big partition and it didn't let me format the small one.

I used partition magic, formatted the first one, and when I rebooted I knew that the main reason was that the bios file was on that partition, so the computer coudln't boot. I inserted the cd again and re-joined the partitions. Voilà!!

Oh, and all that in one hour after nappystudios post! ;)

@Mods: Close the thread if you want (Hope this helps for anyone with the same problem)

#339112