[Help] Start Up Time

Ok, i have built two computers, one for my mom, and one for me. For her, i put together a 1Ghz AMD, 40gb 7200HD, and 512DDR and WINXP Home SP2. The sys i built for my self is more than double her stats: AMD 2400+, 80GB 7200HD's, 1024DDR, and WINXP Pro SP2. yesterday i was over at her house to do some simple virus/spyware/malware cleanup, and when i started up her system, it took only 8 seconds from touching the power button to get to the login screen. But, when i start up my own system, which is obvously much much more powerful than hers, it takes about 17 seconds to get to the login screen. Why is this? Could it be that she only has 12GB of her 40GB used, and i have about 65GB og my 80GB used? i keep my system defragged as much as possible, *cry* but why does her inferior setup start faster than mine?

#273440

Haha, I had that issue before and although I can't tell you why that is, I bet more than likely it has something to do with your startup services and/or registry settigns (if you've installed a lot of programs). I have some registry tweaks that I saved up (always unload unused .dlls from memory, disable paging exec, disable task offloader, disable prefetch, etc.) and once I merge those tweaks with my registry,, my system boots up in less than half the time it used to take. I also went to the Services applet (in control panel) and disabled some useless services from starting up and that may have helped slightly too.

In short, tweak your registry and startup services and you'll have a computer starting up MUCH faster.

#273442

Ah, enter the wonderful world of start-up tweaking :)

Here are some tips on how to make your computer boot (and work) faster!

1. Diminish the amount of programs that start with windows

A lot of programs that you install think they're essential to you and your computer, while you might only use these programs occasionally... It's time to disable them all! How?

Go to: Start/run and type "msconfig" without the "". You will see the "system configuration utility". Now you'll need to go to the "startup" tab, where you'll see a lot of cryptic and less cryptic boxes that all indicate a program that is being started when you boot up. Ideally, you should have few of those, and the one that DO boot up should be the ones you want to boot up. Using my system as example:

*Avedesk

*Client (Samurize... I told you it could be cryptic)

*YzDock

*YzShadow

*Yztoolbar

Things that I wont allow to boot (unchecked)(google is your friend: find out what the progs do!):

*rundll32

*ctfmon

*cthelper

A billion others

A stock version of windows XP should have none or one program checked, being ms messenger. I can imagine that 25 programs booting up can slow up the booting time of your computer...

2. Disable services you dont use

Windows has the very bad habit of thinking you are a person that does absolutely everything with your computer: "You", windows XP argues, "are the kind of person that might use your computer to a wireless network, while being connected to a server that has access to a broadband connection that is being shared with you. You use a webcam, scan images, print, compile programs, send messages with command prompt, have a tweaked usb coca cola can attached to your computer and remotely control the Pentagon through 1024bit encryption." Of course, while some of these might be true, some certainly arent. Services are, quite simply, programs that enable windows XP to do... something. However, they need to boot up with your system, and you might as well disable those you wont use (bluetooth support for example), untill you'll need them. To access the services panel you'll need to go to: start/run and type "services.msc" without the "" (of course). For a full listing of the services, what they do and which are needed I point to Black Viper's absolutely excellent site (www.blackviper.com [seems to be down at the moment... I'm sure it'll be back up very soon]).

3. Tweak your bios

Your bios can be just as stupid as windows XP: it will start you RAID configuration while you dont have RAID, it thinks your processor is only a 2000+, it will check a billion things that really shouldn't be checked... If you don' t feel comfortable touching your bios (and I can assure you, things CAN go wrong), I would be very very careful! Things you should check for in your bios is if quick boot mode is enabled (unfortunately I cant guide you through this, it's normally just an option that is "on" or "off", but each bios is different...). If you do not use raid, it would be a smart thing to make sure that raid isnt enabled (which will shave off 5 seconds of your boottime). Once again: AT YOUR OWN RISK! doing something wrong can prevent your bios from booting, which will force you to open your case, clear the cmos (that means changing jumpers from place and resetting them to the same place) and reconfigure your WHOLE bios! It might even fry your computer (changing the timings of your processor or FSB can do this).

4. Use microsoft's "bootvis" tool.

Last but certainly not least, defrag, and then use this wonderful little program. It will speed up your booting time considerably! You'll need to find it first (majorgeeks has a copy) , install it (it's very lightweight, dont worry), start it, go to "trace/next boot+ driver delays", let your comp restart, go to "tools/optimize system", let your comp restart again, and then you computer will be tweaked. Pure heaven, believe me. If you do just one thing, do that :)

Hope I helped you out there.

#273452

Also, if you use GoBack, I find that adds a lot of time to the startup.

-NC

#273475

awesome, thanks i really appreciate the replies, and gonna try out the methods described above. i'm hoping they will cut down the start time a bunch.

but, lol, i'm still frustrated as to why the inferior comp starts up faster than mine with out any tweaking. i'm not quite sure how windows starts up, but does it quickly catalogs all files and directories during startup? because if this is true, then it would be more understandable, since i use 7 times the amount of space, and it would take more time to scan it all. but alas, i am off to go do some tweaking and see what i can do.

thanks for the help!

:edit:

OMG WOW! thanks for directing me to bootvis, now the windows loading bar doesn't even make it across once before jumping to the login screen, that chopped off a good ten seconds, thanks!

#273521

awesome, thanks i really appreciate the replies, and gonna try out the methods described above. i'm hoping they will cut down the start time a bunch.

but, lol, i'm still frustrated as to why the inferior comp starts up faster than mine with out any tweaking. i'm not quite sure how windows starts up, but does it quickly catalogs all files and directories during startup? because if this is true, then it would be more understandable, since i use 7 times the amount of space, and it would take more time to scan it all. but alas, i am off to go do some tweaking and see what i can do.

thanks for the help!

:edit:

OMG WOW! thanks for directing me to bootvis, now the windows loading bar doesn't even make it across once before jumping to the login screen, that chopped off a good ten seconds, thanks!

Hah, glad you liked it :)

(and no, windows does not catalogs all files and directories during startup :) )

#273616

holy mother of god - 10 seconds off ? way to go! :)

i tried it before and felt it was a wee bit faster but thought its all in my head

Do u feel superior now? :P

#273632

technically bootvis doesn't do anything xp doesn't do on its own, as xp does its own boot optimization (i assume you used the optimize boot function). the *real* use for bootvis is the "trace boot" feature, which lets you identify boot bottlenecks.

#273647

off topic but, is there a way to delete something from the boot list when you startup? Like when asks you to choose which OS to load.

#273681

off topic but, is there a way to delete something from the boot list when you startup? Like when asks you to choose which OS to load.

are you dual-booting? it's pretty important if you want to be able to choose the os.

otherwise, you can edit boot.ini in msconfig.

#273683

technically bootvis doesn't do anything xp doesn't do on its own, as xp does its own boot optimization (i assume you used the optimize boot function). the *real* use for bootvis is the "trace boot" feature, which lets you identify boot bottlenecks.

yes that is what i read on the microsoft website, but the results are obviously very different, for my machine at least.

#273684

@dreamz, It's from StyleXP's boot screen, theres a boot thing there. There's nothing in Msconfig to actually delete it....

#273705

technically bootvis doesn't do anything xp doesn't do on its own, as xp does its own boot optimization (i assume you used the optimize boot function). the *real* use for bootvis is the "trace boot" feature, which lets you identify boot bottlenecks.

As you said, Bootvis' "optimize" command won't fix any of these bottlenecks. However, Windows XP's boot optimization you speak of (which is limited to defragging your boot files: i.e. if the files are fragmented, the files will be defragmented, but that's it) is totaly different from bootvis' boot optimization (which actually changes the boot files to a different place on your hard disk for quicker acces: i.e. all bootfiles are placed in one big block). So in fact, bootvis "optimize" command really does something that windows xp doesnt do :)

#273744

@dreamz, It's from StyleXP's boot screen, theres a boot thing there. There's nothing in Msconfig to actually delete it....

Actually, you need to

1.RIGHTCLICK "my computer"

2. select "PROPERTIES"

3. go to the "ADVANCED" tab

4. push the "SETTINGS" button in the "STARTUP AND RECOVERY" part

5. push the "EDIT" button

You should see something like this:

[boot loader]

timeout=30

default=multi(0)disk(0)rdisk(0)partition(1)WINDOWS

[operating systems]

multi(0)disk(0)rdisk(0)partition(1)WINDOWS="Microsoft Windows XP Professional" /noexecute=optin /fastdetect

Setting timeout to 0 will remove the option to select your operating system at startup; it will select the default operating system (the first one)

Alternatively, you could remove the line of the operating system that you dont use (multi(0)disk(0)... etc etc)

Be careful, you dont want to delete the operating system that you DO use, because that would mean that you'll have to edit the boot.ini through the startup cd (which is a pain).

Hope this solves your problem

#273747