[question] do all pc cases fit all motherboards

alo,

i've got a gateway presently, p4 chip/motherboard... old, want to go faster, but this time, $ is a factor. thus, going with amd. question is, do i need to get a new case too, or will the screw holes match up with an amd compatible board? if you're wondering, i'm already stretching the budget so much with this new system i'm putting together so even an extra $40 or so for a new case is more than i have.

thanks

edit---by the way, if you're interested in some good prices on mb combos, take a look at this page (you'll see what i mean)

http://www.partspc.com/store/combination.htm

#241273

atx form-factor mobo should fix any atx form-factor case. having said that...some of the biggies like compaq, dell and gateway use proprietary stuff. your best bet is to buy a mobo from someplace where you can return it if it doesn't fit. but yeah, you may need to re-case.

how's that for non-definite? :)

#241278

a follow-up question, if i may...

i have an idea of what i want as far as a mb/cpu combo, but wondering if anyone had any suggestions... looking to spend around $200-250 for the combo (AMD).

#242932

a follow-up question, if i may...
Nope. Your forbidden.
i have an idea of what i want as far as a mb/cpu combo, but wondering if anyone had any suggestions... looking to spend around $200-250 for the combo (AMD).
Dangit wook, I said no. Suggestions for what? Best bang for your buck? I don't know if you know about it, but there is PriceWatch . Beyond that, I can offer no more assistance.

#242939

that's what i meant by i have an idea of what i want, i did find a few that looked ok, but i don't know of their reliability or quality...

e.g. http://www.partspc.com/store/product4524.html

by the way, at the end of this month, i am no longer part of the STL club!!! woohoo!!! back to NY

#242944

yup, atx is atx, so it'll fit.

the best combo:

abit nf7-s v2.0 + amd athlon xp mobile barton (the 2600+ overclocks the best)

both are under $90 the last time i checked, and it's easy to overclock the mobile chip to 3200+ speeds. i got myself the 35w version and i'm running at 2.2ghz @1.575v vcore.

let me know if you want some more information on it. i recommend that combo to everyone.

#243197

so you're saying, skip the 3200 and buy the cheaper 2600? if it can be overclocked to the same, i guess it's worth saving the $

i hate to be a pest, but after looking through pricewatch, i can't find a 2600 version that's 35w (only 45w) is that going to make a difference? would you be able to show me a link to a specific store that offers what you said?

thanks :)

#243206

definitely save the money. people who buy the 3200+ are just wasting money. you can get the mobile and clock it up to the same speed and save 40%.

the mobile chips are among the hottest chips out there right now. why?

-they're made for laptops, so the multiplier is unlocked

-they're made for laptops, so they have to run cooler, hence, the lower voltage

-lower voltage --> better for overclocking

-mobile chips are the "cream of the crop." they are some of the best chips available.

lots of mobiles: http://www.newegg.com/app/ViewProduct.asp?...property&DEPA=0

you don't need to get the 35w. i have the 35w and it's great, but i've heard the 2600+ overclocks better. either way, you'll reach 2.2ghz easily. people get these chips so they can hit 2.7ghz on air.

#243213

that link was dead, but i did find what you were referring to on their site... this is the one i found:

http://www.newegg.com/app/ViewProductDesc....-103-436&depa=1

i had no idea you could use mobile chips in a desktop, for some reason, in my head, i had assumed they were constructed differently as to not be interchangable between desktops and laptops.

i found the mb for $70, so between the 2, looking at about $160 or so, way under my planned budget... thanks for the help.

#243226

hmm, maybe hotlinking didn't work. i couldn't view your link either.

the mobile chips are identical to the desktop chips and they work very well. it's been documented for a while now actually.

so what did you decide on? abit nf7-s v2.0 and a mobile?

note: if you're getting the abit, make sure you get nf7-s v2.0, not the s2 or whatever it's called. the one i recommend has the soundstorm onboard apu, which rivals the audigy2. :)

#243228

i think i am going to get with that combo... i was looking at the DFI 'NFII, but the abit is a little cheaper, and looking at them side-by-side, their features were pretty identical. also, on overclocking.com, i started seeing a lot of negatives about the DFI's BIOS... they seem to have a lot of corruption problems.

i'm trying to catch up with the times, this is the first pc i've built in about 8 years, so a bunch of the new tech and terms out there, i was completely unfamilar with (barton, etc.)... last one i built was an AMD 600mhz i think....

i almost made that mistake of choosing the S2, but there was a big note on the page i was on that said something like "IF YOU'RE LOOKING FOR THE -S v2.0, THEN CLICK HERE!)

thanks for your help...

#243243

sweet! let me know if you need any help.

the dfi is a good board, but most people find it too expensive and too unstable. the abit one is by far the best, and known to be so.

glad you saw the little note. ;)

well, congrats on the new rig. let me know when you get it up and running. i hope you have some good low latency pc3200 (or higher) ram. good luck! :)

#243247

now that i have the main components picked out, maybe you can also help me with the sub-parts needed... for e.g., i know the standard heatsink and fan are not going to cut it if i try to overclock, i will need additional cooling methods... what do i buy? thermal paste, pad.... it's all so confusing!!!! fans, how many?

or maybe, is there an all-in-one guide that shows all of this? i want to buy these tonight, i think and have them here for the weekend or monday...

thanks

#243273

i don't know of an all-in-one guide, but it's bound to miss something.

i added you to my msn. feel free to contact me.

get a good heatsink (e.g. thermalright) and some arctic silver.

#243276

how does this setup look? anything you think i'm missing or should replace? (512mb will get me started, once it's working i'll bump it to 1 gig)

Motherboard- ABIT NF7-S v2.0

CPU- AMD Mobile Athlon XP-M 2600+ (45W) Barton 266MHz FSB SocketA

Thermal Paste- Arctic Silver 5

Heat Sink/Fan- Thermaltake Volcano 10+

RAM- 512MB DDR PC3200 400Mhz 184-Pin Dimm

Case- ATX case Beige Color with 500w ATX PS Front USB2.0/Mic./Spk

#243604

looking good. some comments:

heatsink: thermaltakes aren't generally known to be the best heatsinks. the best heatsink manufacturers are thermalright, swiftech, zalman, and vantec (the aeroflow).

ram: what brand is that? and what cas?

case: you can choose whatever you want here, but the psu is important. i'm assuming it's a generic. don't skimp on the psu, especially if you're overclocking. it's not the wattage, but also the reliability of the rails. you need a reliable, clean power source, so i recommend antec, enermax, or tagan.

#243821

i accidently left out the separate power supply.... the one that is coming with the case is just going to be a throw-away basically. i did take your advice and changed around the config a bit:

Motherboard: ABIT NF7-S v2.0

CPU: AMD Mobile Athlon XP-M 2600+ (45W) Barton 266MHz FSB SocketA

Thermal Paste: Arctic Silver 5

CPU Heat Sink/Fan: Vantec Socket 370/A TMD CPU Fan--VA4-C7040

RAM: 512MB DDR (32x8 DRAM) PC3200 400Mhz 184-Pin Dimm (Kingston)

Case: Standard Case w/ Front USB + Audio, w/ 400w PS, Beige

Power Supply: Antec SL400 Smart Power P4 400W Power Supply

i think picking the ram (for me) is the hardest part... with all of the different types, i'm never 100% sure it's exactly right for my system. is this going to be ok with the mb?

http://www.zipzoomfly.com/jsp/ProductDetai...te=pricegrabber

#243933

vantec aeroflow is an awesome heatsink. i love the construction. my only complaints about it are:

-only accommodates a 70mm fan, but there are ways around that

-the tmd fan, while being efficient, was known to have problems. my friend needed a fan, so i lent him the tmd fan, but it died in the middle of the night and his chip fried.

kingston ram rocks. that's what i'm using right now, which i believe is also the one shown in your link. see if you can get the lower latency one if possible, maybe 2 or 2.5. but it still runs like a dream.

antec smart power is great. i personally like the truepower more because the lines are supposedly cleaner, but antec rocks. :)

#244222

i looked around a bit and i'm going to change the heatsink to either the aeroflow2 (they replaced the tmd fan with a ball bearing one) or the coolermaster aero 7+.... for their prices, i've read only good things about both.

i read a review, though, regarding aeroflow2 and the guy was using the same mb i'm looking to get... he mentioned he had a difficult time getting it in because the capacitors were in the way...

and is corsair a decent brand of ram?

btw-i added you to msn, but we never seem to be available at the same time :(;)

#244265

where do you live? i'm around chicago, so that's central time.

aeroflow 2 should be good. it's just an updated version of the first one, but with a huge conventional fan on top. it's basically the same heatsink with a different fan. out of the two you listed, i'd get the aeroflow. the coolermaster aero looks neat, but it doesn't cool that well.

i have the thermalright alx-800 that i bought for $10 on sale. it's a great heatsink, and with a high rpm fan, it rivals the thermalright sp-97, the best heatsink available. it's great. :) the slk ones are also great heatsinks.

corsair is one of the best brands out there, along with crucial, kingston, micron.

#244297