Aqua-Soft Forums: Pc Doesn't Start After Bios Update - Aqua-Soft Forums

Jump to content

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

Pc Doesn't Start After Bios Update Rate Topic: -----

#1 User is offline   isenduil Icon

  • Group: Recruit
  • Posts: 1
  • Joined: 25-October 11

Posted 25 October 2011 - 03:22 AM

I tried to do a Bios update and now nothing but the fans, power light, and optical drives. I've tried remove removing the CMOS battery for 30 secs to 20 mins and no change. I've tried several other options i've found online and still nothing.
anyone else got any ideas?

Zotac nForce 750a
4- G.skill DDR2 2GB x 4
2- Geforce 9800 GT
AMD Phenom II X4 920 2.6GHz
0

#2 User is offline   gladiolus Icon

  • Group: Member
  • Posts: 73
  • Joined: 14-February 12

Posted 14 May 2012 - 06:43 AM

Most bios chips are 8 pin surface mount chips and easy to replace if you have the experience. If you only have basic soldering skills an are not confident at atlest stripping the laptop down you should take makinus advice and take to a repair center.it could have more than 8 pins making the job more difficult and usually require special equiptment to remove safely such as an infrared rework station
0
Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic